Home | GPS | Special Offers | Deutsch  

- - - - - - - - - - - - - - - - - - - - - - -
Edge 520 | epix | Foretrex 601 | etrex 10/20x | etrex Touch 25/35 | GPSMAP 66 | Montana 700/700i/750i | GPSMAP 276Cx | Camper 780 | Camper 785 | Overlander | cfQue 1620 | GPS18 | TracPak | Maps | Accessories | Buyer's Guide | Shopping basketShow shopping basket
Firmware: V3.20 - V3.10 - V2.90 - V2.80 - V2.70 - V2.60 - V2.50 - V2.40 - V2.20

The following lists of changes are based on information provided by GARMIN. Changes or improvements which we consider important or especially useful are shown highlighted.

To view the current firmware version, complete the following steps:

  1. Turn on the GPS.
  2. Select the "Setup" page.
  3. Select the "About" page.
  4. The software version will be shown on the first line.

Each upgrade replaces the complete firmware in the GPS, which means you need to install only the version you wish to apply. There is no need to install any previous versions.


Changes made from version 3.10 to 3.20:

  1. Added confirmation of initial language selection.
  2. Fixed display of geocache coordinates with non-default map datum.

Firmware Upgrade V3.20 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.90 to 3.10:

  1. Improved ability to clear unit settings on power up: now only requires menu key and enter key to be held when powering the unit on.
  2. Improved load times for geocache descriptions.
  3. Fixed issue with reviewing individual route points from the Route Planner application.
  4. Fixed issue with displaying tracks on the map after performing an area calculation.

Firmware Upgrade V3.10 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.80 to 2.90:

  1. Fixed cause of a warning message when device is ejected from a PC.

Firmware Upgrade V2.90 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.70 to 2.80:

  1. Improved GPS response at low speeds.
  2. Improved ability to clear unit settings ("All Reset") on power up: now only requires menu key and enter key to be held when powering the unit on.
  3. Fixed issue that was causing some devices to display a 'memory full' message followed by bad device behavior.
  4. Fixed issue with distance to destination data field.
  5. Fixed issue where waypoints and geocaches could be lost.

Firmware Upgrade V2.80 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.60 to 2.70:

  1. Fixed issues with Farsi language.

Firmware Upgrade V2.70 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.50 to 2.60:

  1. Added marine colors mode.
  2. Improved GPS response at low speeds.
  3. Fixed issue with altitude values in track logs.
  4. Fixed issue with track log naming when using BaseCamp.
  5. Fixed issue with compass CDI pointer.
  6. Fixed issue with distance units in geocache dashboard.

Firmware Upgrade V2.60 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.40 to 2.50:

  1. Improved support for Bulgarian.
  2. Added project waypoint to waypoint page option menu.
  3. Fixed issue displaying location in large data fields for certain position formats.

Firmware Upgrade V2.50 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.20 to 2.40:

  1. Fixed issue where location large data fields draw incorrectly.

Firmware Upgrade V2.40 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

Changes made from version 2.10 to 2.20:

  1. Added support for advanced geocache logging with OpenCaching.com, see TrailTech for more information.

Firmware Upgrade V2.20 (Please use Web-Updater to install the latest firmware)

To table of contents To table of contents

GARMIN etrex 10 Rugged, portable, waterproof GPS device with easy to read display and USB interface for data exchange with computer. Buttons and click stick for easy use, see detailed description.

Home | GPS | Special Offers | Deutsch